2 SAFETY ADVICE
4
2.1
Use definition
–
intended use
This chassis component is designed and built to withstand the normal stresses and strains of regular racing.
Info
Only use this chassis component in closed-off areas remote from public road traffic.
Only use this chassis component in the vehicle for which the chassis component is approved and/or
recommended.
2.2
Misuse
The chassis component must only be used as intended.
Dangers can arise for people, property and the environment through use not as intended.
Any use of the chassis component beyond the intended and defined use constitutes misuse.
Misuse also includes the use of operating and auxiliary fluids which do not meet the required specification for
the respective use.
2.3
Safety advice
A number of safety instructions need to be followed to operate the product described safely. Therefore read
this instruction and all further instructions included carefully. The safety instructions are highlighted in the text
and are referred to at the relevant passages.
Info
Various information and warning labels are attached in prominent locations on the product described.
Do not remove any information or warning labels. If they are missing, you or others may not recognize
dangers and may therefore be injured.
2.4
Degrees of risk and symbols
Danger
Identifies a danger that will immediately and invariably lead to fatal or serious permanent injury if the
appropriate measures are not taken.
Warning
Identifies a danger that is likely to lead to fatal or serious injury if the appropriate measures are not
taken.
Note
Identifies a danger that will lead to considerable machine and material damage if the appropriate measures are
not taken.
2.5
Safe operation
Danger
Danger of accidents
A rider who is not fit to ride poses a danger to him or herself and others.
–
Do not operate the vehicle and use chassis components if you are not fit to ride due to alcohol,
drugs or medication.
–
Do not operate the vehicle and use chassis components if you are physically or mentally impaired.
Only use the chassis component when it is in perfect technical condition, in accordance with its intended use,
and in a safe and environmentally compatible manner.
