Rev 6.0/11-20
FL1-DC: #35026
17
T
O
R
ELEASE
THE
P
AD
FROM
THE
L
OAD
Make sure load is at rest and fully supported before
releasing vacuum pad.
1A
1) Press the lever to release the latch and push the valve
handle inward (fig. 1A) to the “release” position (
).
Do not move lifter until pad releases completely, because such movement could
result in load damage or personal injury.
Before you lift another load, perform the Every-Lift Inspection (see
A
FTER
U
SING
THE
L
IFTER
1)
Leave the valve handle in the “release” position ( / power
off
).
2)
Charge the battery after each workday as needed (see
).
1
3)
Use the hoisting equipment to lower the vacuum lifter gently onto a stable support. Then
detach the hoisting hook from the lift point.
Caution:
Do not set the lifter on surfaces that could soil or damage vacuum pad.
1..... To maximize battery life, charge it promptly after each use.
OPERATION
