Product
Description
Designed for use with hoisting equipment, the FL1
-
DC lifter supports loads using vacuum for lifting in
the flat orientation.
Model
Number
FL1HV11DC
Vacuum Pad
(standard rubber
1
1...... Available with other rubber compounds for oily surfaces and other special purposes (see
)
10" [25 cm] nominal diameter, lipped (Model HV11)
Pad Spread
11" x 11" [28 cm x 28 cm] to outer edges
Maximum
Load Capacity
2
2...... The Maximum Load Capacity is rated at a vacuum of 16" Hg [-54 kPa] on clean, smooth, nonporous flat surfaces with a friction coefficient of 1. Pad
compound, load rigidity, strength, surface conditions, overhang, angle, center of gravity and temperature can also affect the lifting capacity. A
“qualified person” should evaluate the effective lifting capacity for each use (see definition under
300 lbs [135 kg]
Lifter
Weight
45 lbs [21 kg]
Power
Source
12 volts DC, 3.5 amps
Battery
Capacity
7 amp-hours
Product
Options
See separate instructions about optional features.
Operating
Elevation
Up to 6,000' [1,828 m]
Operating
Temperatures
32° — 104° F [0° — 40° C]
Service
Life
20,000 lifting cycles, when used and maintained as intended.
3
3...... Vacuum pads, filter elements and other wear-out items are excluded.
!!–CE–!!
This symbol appears only when a CE Standard is different from other applicable standards. CE requirements are
mandatory in the European Union, but may be optional elsewhere.
ASME Standard
BTH-1
Design Category "B", Service Class "0" (see
for more information)
Rev 6.0/11-20
FL1-DC: #35026
3
SPECIFICATIONS
