P1-DC3: #35123AUS
Rev 4.0/2-21
8
3.3)
3D
3E
Make sure
hook has
restraining latch
(circled).
Attach the hoisting
hook to the lift point
(fig. 3D).
Use rigging (fig. 3E)
as needed to make
sure the hook does
not interfere with the
load.
Only use rigging rated for Maximum Load Capacity
plus Lifter Weight.
3.4) Use the hoisting equipment to remove the lifter from the shipping container. Avoid
damaging the vacuum pads.
4B
4A
4)
4C
4D
Connect the electrical
connectors (figs. 4A-B
and figs. 4C-D).
If the lifter has a
notification buzzer, install
the 9-volt battery as directed in
5)
5A
Remove the pad covers (fig. 5A) and save them for future use.
6) Perform tests as required under
.
ASSEMBLY
