Product
Description
Designed for use with hoisting equipment, P1-04DC3 lifters support loads using vacuum and manipulate
loads using 180° rotation and manual 90° tilt motions.
Model Number
P110C04DC3
P110T04DC3
P11104DC3
Vacuum Pads
1
1...... Available with other rubber compounds for special purposes (see
).
(4 each, standard rubber)
10" [25 cm] nom. diameter,
concave (Model G0750)
10" [25 cm] nom. diameter,
with replaceable ring
2
2...... Standard with replaceable sealing ring for rough or textured surfaces (see
).
(Model
VPFS10T)
11" [28 cm] nom. diameter,
lipped (Model G3370)
Pad Spread
(to outer edges)
49" x 10"
[125 cm x 25 cm]
50¾" x 11¾"
[129 cm x 30 cm]
51" x 12"
[130 cm x 30 cm]
Maximum Load
Capacity
3
3...... The Maximum Load Capacity is rated at a vacuum of 16" Hg [-54 kPa] on clean, smooth, nonporous flat surfaces with a friction coefficient of 1. Pad
compound, load rigidity, strength, surface conditions, overhang, angle, center of gravity and temperature can also affect the lifting capacity. A “qualified
person” should evaluate the effective lifting capacity for each use (see definition under
270 kg
270 kg
320 kg
Lifter
Weight
44 kg
Power System
12 volts DC, 5.5 amps
Battery Capacity
7 amp-hours
Rotation
Capability
Manual, 180°, with latching at each ¼ turn (when required)
Tilt
Capability
Manual, 90°, with automatic latching in vertical position
Operating
Elevation
Up to 6,000' [1,828 m]
Operating
Temperature
32° — 104° F [0° to 40° C]
Service Life
20,000 lifting cycles, when used and maintained as intended
4
4...... Vacuum pads, filter elements and other wear-out items are excluded.
Software Version
Intelli-Grip
®
7.6
Design
Standard
Compliant with AS 4991. Note: Each circuit of the Dual Vacuum System complies with the capacity
requirements of this Standard.
Rev 4.0/2-21
P1-DC3: #35123AUS
3
SPECIFICATIONS
