P1-DC3: #35123AUS
Rev 4.0/2-21
18
T
O
R
OTATE
THE
L
OAD
Make sure load is positioned correctly on lifter (as previously
directed).
Never disengage rotation and tilt latches at the same time,
because this could result in load damage or personal injury.
1)
2A
3A
Make sure the load has
enough clearance to rotate
without contacting anyone
or anything.
2) Use a control handle
(circled in fig. 2A) to keep
the load under control at
all times.
Unbalanced
loads may rotate
unexpectedly when
latch is disengaged.
3) Pull the rotation release
lever (fig. 3A) to disengage
the rotation latch, and
rotate the load as required.
4) To stop rotation, let go of
the lever and guide the
load to the next stop.
Note: Whenever rotation is not
required, keep the rotation latch
engaged, to prevent load damage
or personal injury.
OPERATION
