Make sure load is positioned correctly on lifter (as
previously directed).
Never disengage rotation and tilt latches at the same time,
because this could result in load damage or personal injury.
Rev 4.0/2-21
P1-DC3: #35123AUS
19
T
O
T
ILT
THE
L
OAD
1)
3A
2A
Make sure the load has enough
clearance to tilt without
contacting anyone or anything.
2) Use a control handle (circled in
fig. 2A) to keep the load under
control.
Unbalanced loads
may tilt unexpectedly
when latch is disengaged.
3) If the pad frame is latched, pull
the tilt release lever (fig. 3A) to
disengage the tilt latch. Then tilt
the load as required.
Note: See
for
information about allowable
overhang.
4A
A load with overhang may force you to
release the control handle as the load
approaches the flat position. In this case,
use a hand cup (circled in fig. 4A) or other
appropriate means to control the load.
Note: The pad frame automatically latches
when tilted to the vertical position.
OPERATION
