WPI A310 Accupulser, Instruction Manual

A310 Accupulser™ Pulse Generator

World Precision instruments

SPECIFICATIONS

Timing Parameters

 ............accuracy better than % of set value, each parameter is 

continuously variable, through two orders of magnitude, 
in six ranges

eVent interVAl ...................00 µs to 000 s
eVent delAY .........................0 µs to 00 s
Pulse WidtH .........................0 µs to 00 s
trAin durAtion .................00 µs to 000 s
Pulse interVAl ...................0 µs to 00 s (50 KHz max pulse frequency)

Inputs

eXt sYnc ................................accepts µs minimum pulses
 

ttl, cmos, rs3c compatible

eXt GAtes VoltAGe ............accepts µs to 

∞ 

pulses

ttl, cmos, rs3c compatible

eXt GAtes sWitcH ..............any switch closure, 5 mA max source

Outputs

sYnc .........................................

≈

5 µs, ttl & 5V cmos compatible, 0 mA max sink and 

source

isolAtor ................................ttl & 5V cmos compatible, 0 mA max sink and source
monitor ................................0-5 Vdc, 50 mA max sink and source
+VAriABle/-VAriABle ........0 to ± V low range,  mV resolution 
 

0 to ±0 V high range, 0 mV resolution 

5 mA max sink and source 

<500 µV Pulsed noise @ 00 kHz band width 

<500 µV dc noise, wide band

< ohm output impedance

Signal Ground

 .......................connected to chassis ground, removable

Power

 ......................................95-30 VAc or 90-0 VAc, switch selectable single 

phase, 50/0 Hz, 0 VA

Temperature

 .........................0° c (50° F) to 0° c (0° F)

Dimensions

 ...........................Height:  3 mm (5.5 in.) plus  mm (0. in.) 

removable bail

Width: 3 mm (.0 in.)

depth:  mm (9.5 in.)

mountable in standard Ansi/eiA rs30c 9 in. rack

Weight

 ...................................... kg (9 lb), 5.5 kg ( lb) shipping