INSTRUMENT DESCRIPTION
Parts List
EVOM
or
EVOMX
meter (batteries installed: one 9V alkaline battery, six 1.5V
alkaline AA batteries)
STX2
electrode set
600-grade ultra-fine sandpaper
This
Instruction Manual
Unpacking
Upon receipt of this instrument, make a thorough inspection of the contents and check
for possible damage. Missing cartons or obvious damage to cartons should be noted
on the delivery receipt before signing. Concealed loss or damage should be reported at
once to the carrier and an inspection requested. Please read the section entitled “Claims
and Returns” on the Warranty page of this manual. Please call WPI Customer Service if
any parts are missing.
Returns:
Do not return any goods to WPI without obtaining prior approval (RMA #
required) and instructions from our returns Department. Goods returned (unauthorized)
by collect freight may be refused. If a return shipment is necessary, use the original
container. If the original container is not available, use a suitable substitute that is rigid
and of adequate size. Wrap the instrument in paper or plastic surrounded with at least
100 mm (four inches) of shock absorbing material. Please read the section entitled
“Claims and Returns” on the Warranty page of this manual.
Set-up
Required but not provided: small flat-head screwdriver to fit zero-adjustment screws.
Meter
• The
EVOM
/
EVOMX
meter is shipped with batteries installed. It is ready for use.
Electrode
• For resistance measurements only, the
STX2
electrode can be used directly from dry
storage without preconditioning.
• For voltage measurements, the electrode needs to be equilibrated. See Electrode
Preparation under OPERATING INSTRUCTIONS
2 WORLD PRECISION INSTRUMENTS
