4
Aura Allure Spray Tan
GB
Aura Allure Spray Tan
US
Spray Tanning System
•
DO NOT let children play with the Spray Tanning System.
•
NEVER leave spray tanning system unattended.
•
Stay alert and watch what you are doing.
•
DO NOT operate the unit when fatigued or under the influence of drugs or alcohol.
•
Follow all appropriate local, state, and national codes governing
ventilation, fire prevention, and operation.
•
The United States Government Safety Standards have been adopted
under the Occupational Safety and Health Act (OSHA). These standards,
particularly part 1910 of the General Standards and part 1926 of the
Construction Standards should be consulted.
•
NEVER direct the spray gun at animals.
•
Ensure that the spray area is well ventilated.
•
DO NOT breathe in spray tanning solution. Wearing nasal plugs and
operating an extraction fan designed for the purpose is recommended.
•
DO NOT spray into the eyes.
•
If spray tanning solution is sprayed into the eyes, wash eyes out with
water immediately and consult a doctor.
•
DO NOT spray tanning solution into open wounds or onto damaged skin.
•
Cover your hair when spraying your face. Otherwise bleached hair in
particular could be stained by the spray tanning solution.
•
NEVER immerse the Spray Tanning System into water.
•
WARNING! NEVER use your Spray Tanning System near bath tubs,
shower trays or other receptacles that contain water.
•
NEVER place the Spray Tanning System near a washbasin or another water
source. Water always represents a hazard even when the system is switched off.
•
NEVER expose the equipment to rain.
•
DO NOT use outdoors or operate where aerosol (spray) products are being used.
•
NEVER drop or insert any object into any opening or hose.
•
NEVER block air openings of the spray turbine.
•
Keep electrical cord plug and spray gun trigger free from liquids.
•
NEVER hold the cord at plug connections to support the cord. Failure to
observe may result in an electrical shock.
•
If the supply cord is damaged, it must be replaced by the manufacturer
or its appointed service agent, in order to avoid a safety hazard.
•
Keep cord away from heated surfaces.
•
NEVER operate spray tanning system if cord or plug is damaged.
•
As additional protection, the installation of a circuit protective device
such as an ALCI is recommended. Ask your installer for advice.
•
DO NOT use a 3 to 2 adapter.
•
Unplug turbine before cleaning any parts. Use only manufacturer authorized
parts. User assumes all risks and liabilities when using parts that do not meet
the minimum specifications and safety devices of the turbine manufacturer.
