8
Aura Allure Spray Tan
GB
Aura Allure Spray Tan
US
Spray Tanning System
11. Tips on using the spray tanning system
Before commencing application, check that all necessary protective
measures (nasal plugs, safety goggles, hair covering) have been taken.
i
Practice on a large piece of cardboard or paper first of all in order to find the
optimal settings for the spray tanning lotion used.
•
Start and end the spray movement
outside the body.
•
Avoid interruptions during the spray
movement.
•
The spray movement should come
from the arm, not just from the wrist.
This ensures that a uniform distance is
maintained between the spray gun and
the body during the spray operation.
Select a distance of 5-7 inches, depending
on the desired spray jet width.
Fig. 7 a:
CORRECT Even distance
Fig. 7 b:
INCORRECT uneven distance
will result in uneven tanning
•
Move the spray gun at an even speed
•
When tanning is complete, switch off
turbine and any tanning extraction fan (if
used) after fumes/mist have cleared.
5-7 inches
a
b
7
12. After application of the spray tanning lotion
i
The full tanning effect develops during the first 6-12 hours after the treatment.
•
Allow the spray tanning lotion to dry for
10-15 minutes before getting dressed
again.
i
You can also use the warm air from
the air hose to accelerate the drying
process of the spray tanning lotion.
To do this, simply remove the spray
gun from the air hose and switch
the system on.
•
DO NOT shower or bathe in the first 6-8
hours after application as this will affect
the tanning result.
