5
The control panel is located at the top or in the middle of the appliance.
1.
ON / OFF control button
2.
Light control button
3.
Display
4.
Temperature plus button
5.
Temperature minus button
Description of the product features
Control panel
o
The control panel is located in the top of the appliance, behind the glass door.It is easy to set the
temperature of the appliance and see what temperature the appliance is set to.
One cooling zone
o
There is one cooling zone inside of your wine cooler.
o
The cooling zone has a temperature control and temperature display.
Interior light
o
The cooling zone has an interior light. The light can be switched on and off by using the light control
button
(2)
.
The wine cooler shelves
o
The wooden shelves are fully adjustable to suit various wine bottle shapes and sizes.
o
To prevent damaging the door gasket, make sure the door is fully open when pulling shelves out of the rail
compartment.
o
For easy access to the bottles stored, pull the shelves out approximately 1/3 of the way.
U
sing your Wren wine cooler
Before switching on
o
Make sure that it has been installed by a suitably qualified person, as per the information contained in
Wren
’s installation instructions.
o
After delivery, wait for eight hours before connecting the appliance to your mains supply. This will allow
any refrigerant gasses that may have been disturbed during the transportation process to settle.