6
o
The outside of the appliance and the removable accessories contained within it, should be cleaned with a
solution of liquid detergent and water.
o
The interior of the appliance should be cleaned with a solution of sodium bicarbonate
dissolved in lukewarm water. The interior and accessories should be thoroughly dried,
after the cleaning process has been completed.
o
There can be an odour when you first switch on the appliance. It will lessen as the
appliance starts to cool.
During first use
IMPORTANT: When you use the wine cooler for the first time or restart the appliance after it has been turned
off for a long time, there could be a few degrees variance between the temperature you select and the one
indicated on the LED display. This is normal and it is due to the length of activation time. Once the wine cooler
has been running for a few hours everything will be back to normal.
o
When you first switch on the appliance, the compressor will run continuously until the wine cooler
reaches a cool enough temperature.
o
During this period of time, you should try not to open the door frequently or place bottles inside of the
appliance.
o
If the unit is switched off or unplugged, you must allow at least 5 minutes before restarting the appliance
or reconnecting it to your mains supply.
Switching on the appliance and setting the temperature
o
To switch the appliance on, press the ON / OFF control button
(1)
for 5 seconds.
o
The temperature setting for the appliance is adjustable within the range of 5°C - 22°C.
o
Use the temperature plus
(4)
and minus
(5)
buttons to set the desired internal temperature.
o
The temperature will increase by 1°C if you touch the plus button once and will decrease by the same
amount if you press the minus button once.
o
When you set to a new temperature, the display flashes 2 seconds and then it will display the new set
temperature.
ATTENTION: In the event of a power cut keep the appliance door closed to maintain temperature. Once power
is restored the Wine Cooler will remember the previous set temperature.
IMPORTANT: When the temperature of the cooler is changed, the compressor works harder to reach the
required temperature. During this time, the side panels of the wine cooler can reach up to 45°C however they
will cool down when the set temperature is reached.
