Installing Basin
- Mount the motor to the bracket using the large clevis pin and clip. Connect the 2 wiring harnesses (black and
white) to the spa chair, Turn on spa chair and push and hold the left arrow button to send the push rod forward until it stops.
Push basin under chair and align the push rod assembly to the rear of the basin, attach using large clevis pin and clip. Run the hot and
cold supply lines underneath control box, and fasten the drain pipe to the threaded drain on the rear of the spa.
Mount the rear of the drain pipe to the drain mounting bracket using the smaller clevis pin and clip.
If extension cords are required please be sure to use a 12 gauge cord.
