Warner Shelter Systems Limited
PAGE 8
Step 11
• Raise Centrepole above Top Cross Cable.
SEE DRAWING 15:1
Top Cross Cable
DRAWING 15:1
Bottom Cross Cables
• Push Drop Sheet to the lower half of the frame
to expose the Cable intersection.
• Insert the Centrepole 6 through the socket at
the centre of the Tent Top and lean the
Centrepole against the intersection of the
Cross Cable.
• Install the Flag on the Centrepole from the
outside.
Step 10
CENTREPOLE INSTALLATION
Drop
Sheet
Install
Flag
• Align the Centrepole Sleeve
and lower it over the
intersecting point of the three
Cables. <=
SEE DRAWING 15:2
• Secure the Centrepole to the
Cables using the Lock Pin.
Centrepole
Sleeve
Lock Pin
Cross
Cables
* Be careful when stepping on Tent Top. Removing shoes or using soft shoes is
recommended to avoid soiling or damaging the Tent Top
..\graphicshome\Marquee\Manuals\MQHEX\MQ17Hex Manual 2007.FH11
DRAWING 15:2
