36
21.1. Local Settings
To go to local settings enter
<3.2.PcS>
submenu.
3.2.1.Acc
Working mode accessibility
For detailed description read section 19.2.1.
3.2.2.UUt
Operation mode
For detailed description read section 21.1.1.
3.2.3.Snn
Save mode
For detailed description read section 19.2.2.
3.2.4.Int
Time interval
For detailed description read section 19.2.3.
3.2.5.Lo
Lo threshold
For detailed description read section 19.2.4.
21.1.1. Selecting Operation Mode
Parameter allowing you to select method of determination of sample piece
mass.
Procedure:
Enter
<3.2.PcS / 3.2.2.UUt>
submenu.
Press
key, parameter values are displayed successively one by one:
S_S
Select to set sample mass by determining mass of a single part.
Suu
Select to set sample mass by entering mass of a single part.
Enter respective value and press
key to confirm, then continue
weighing.
21.2. Setting Sample Mass by Entering Mass of a Single Part
Enter
<3.2.PcS / 3.2.2.UUt>
submenu, set
<
Suu
>
value.
Enter
<PcS>
working mode (parts counting), first, text
<SEt_Ut>
is displayed for 1 s, next, window for entering mass value of a single part.
Enter respective value and press
key to confirm, home screen
is displayed automatically along with quantity of parts loaded onto the
weighing pan (pcs).
If the value of entered single part mass is greater than max
capacity value, then message <Err Hi> is displayed.
