6.
Set Plugs to Default:
To set all plugs to the Power-Up
Defaults, type
/D
[Enter]
. Note that if the Default String
includes missing or invalid characters, the /D command
will not function.
7.
Exit:
To exit from command mode, type
/X
[Enter]
.
Note:
When the
/n ON/OFF/BOOT
command is invoked,
the port (
n
) must be specified by number. The Port
Label
cannot
be used to specify the desired port.
ON / OFF / BOOT Examples:
·
To Switch Plug 3 ON, type
/3 ON
[Enter]
.
·
To switch all plugs ON, type
/* ON
[Enter]
.
·
To switch plug 5 OFF, type
/5 OFF
[Enter]
.
·
To switch all plugs OFF, type
/* OFF
[Enter]
.
·
To initiate a boot cycle at Plug 2, type
/2 BOOT
[Enter]
.
·
To initiate a boot cycle at all plugs,
type
/* BOOT
[Enter]
.
Page 10
RPB+ User's Guide
