B.
Specifications
RS232 Port Interface:
Model APS-16:
Sixteen (16) RS232 serial inputs use DB9 connectors configured as DTE
ports.
Model APS-8:
Eight (8) RS232 serial inputs use DB9 connectors configured as DTE ports.
Model APS-4:
Four (4) RS232 serial inputs use DB9 connectors configured as DTE ports.
Coding:
Asynchronous, 7/8 bits ASCII.
Parity:
Even, Odd, None
Stop Bits:
1 or 2.
Data Rate:
300 to 115.2K bps (standard rates).
Flow Control:
XON/XOFF, RTS/CTS, Both, or None.
Timeout:
No activity timeout disconnects port. 1, 5, 10, 15, 30 seconds, 1, 5, 15, 30, 90
minutes.
Memory:
Stores Parameters and captured data. Non-volatile 512K SRAM buffer memory.
Statically allocated.
Break:
Accept Break or Refuse Break
SetUp Switches:
8 position, sets default parameters for baud rate, flow control, response
format, and command echo.
LEDs:
On, Ready, Activity (for each RS232 Port).
Temperature:
0
°
C to 45
°
C (operating)
Power:
AC Version:
IEC-32 Inlet, 115/230 VAC, 50/60 Hz, 5 watts
DC Version:
Terminal Strip, -48 VDC, 0.2 Amp Max.
Size:
Model APS-16:
1.8" x 17.15" x 6.8" (H x W x D)
Model APS-8:
1.8" x 17.15" x 6.8" (H x W x D)
Model APS-4:
1.8" x 17.15" x 6.8" (H x w x D)
Weight:
8 lbs. shipping weight
Humidity:
10 to 90% RH, Non-Condensing
Venting:
Side vents are used to dissipate heat generated within the unit. When mounting the
unit in an equipment rack, make certain to allow adequate clearance for venting.
Apx-2
APS Series - Asynchronous Port Switches, User's Guide
Appendices
