5.
Console Port:
The IPS's serial Console port is an RS232C,
DB9 connector, wired in a DTE configuration, which allows
you to attach either a local terminal or an external modem to
the IPS Master Unit. Note that you cannot attach both a
modem and local PC simultaneously, and that the "Serial Port
Mode" prompt in the General Parameters menu must be used
to specifically configure the Console Port for use with either a
Modem or Local PC.
a)
Modem:
Use a standard serial modem cable to connect
your external modem to the IPS's Modem Port. For more
information, please refer to Section 4.3.2.
b)
Local PC:
Attach a standard null modem cable from your
PC COM port to the Console Port connector on the IPS
back panel.
6.
Local PC Cable:
A standard null modem cable. For a
description of the port interface, please refer to Appendix A.
7.
Modem Cable:
A standard serial modem cable. For more
information, please refer to Section 4.3.2.
3-2
IPS Internet Power Switch; User's Guide
Figure 3.1: Connections Diagram
Summary of Contents for IPS-15
Page 1: ...WTI Part No 13301 Rev B IPS 15 Internet Power Switch User s Guide ...
Page 2: ......
Page 55: ......
