WTI IPS-15 User Manual Download

Page: 3 / 56

Table of Contents

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1

Unit Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1

2.1.

The Master (Main) Unit . . . . . . . . . . . . . . . . . . . . . . . . 2-1
2.1.1.

Master Unit Front Panel . . . . . . . . . . . . . . . . . . . 2-1

2.1.2.

Master Unit Back Panel . . . . . . . . . . . . . . . . . . . 2-2

2.2.

The Optional Satellite Unit . . . . . . . . . . . . . . . . . . . . . . 2-3
2.2.1.

Satellite Unit Front Panel . . . . . . . . . . . . . . . . . . 2-3

2.2.2.

Satellite Unit Back Panel . . . . . . . . . . . . . . . . . . 2-4

Quick Start . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1

3.1.

Hardware Installation . . . . . . . . . . . . . . . . . . . . . . . . . 3-1

3.2.

Communicating with the IPS-15 . . . . . . . . . . . . . . . . . . . 3-4
3.2.1.

The Web Browser Interface . . . . . . . . . . . . . . . . . 3-4

3.2.2.

The Text Interface . . . . . . . . . . . . . . . . . . . . . . 3-6

Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1

4.1.

Power Supply Connection . . . . . . . . . . . . . . . . . . . . . . . 4-1

4.2.

Connection to Switched Outlets . . . . . . . . . . . . . . . . . . . 4-1

4.3.

Console Port Connection . . . . . . . . . . . . . . . . . . . . . . . 4-2
4.3.1.

Connecting a Local PC . . . . . . . . . . . . . . . . . . . 4-2

4.3.2.

Connecting an External Modem . . . . . . . . . . . . . . 4-2

4.4.

Connecting the Network Cable . . . . . . . . . . . . . . . . . . . . 4-2

4.5.

Connecting Optional IPS Satellite Units . . . . . . . . . . . . . . 4-3

Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1

5.1.

System Mode and User Mode . . . . . . . . . . . . . . . . . . . . . 5-1

5.2.

Communicating with the IPS . . . . . . . . . . . . . . . . . . . . . 5-2
5.2.1.

Accessing the Web Browser Interface . . . . . . . . . . . 5-2

5.2.2.

Accessing the Text Interface . . . . . . . . . . . . . . . . 5-3

5.3.

Configuration Menus . . . . . . . . . . . . . . . . . . . . . . . . . . 5-5
5.3.1.

The General Parameters Menus. . . . . . . . . . . . . . . 5-5

5.3.2.

Plug Parameters Menus . . . . . . . . . . . . . . . . . . . 5-9

5.3.3.

Network Parameters Menus . . . . . . . . . . . . . . . . 5-10

5.3.4.

The Telnet Parameters Menus . . . . . . . . . . . . . . . 5-13

5.3.5.

Web Server Parameters Menus . . . . . . . . . . . . . . 5-14

5.4.

Save Configuration Parameters . . . . . . . . . . . . . . . . . . . 5-16

Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-1

6.1.

Plug Numbers and Plug Zones . . . . . . . . . . . . . . . . . . . . 6-1

6.2.

Operation via the Web Browser Interface . . . . . . . . . . . . . . 6-2
6.2.1.

The Plug Status Screen - Web Browser Interface . . . . 6-2

6.3.

Operation via the Text Interface . . . . . . . . . . . . . . . . . . . 6-4
6.3.1.

The Plug Status Screen - Text Interface . . . . . . . . . . 6-4

6.3.2.

Boot/On/Off Commands - Text Interface . . . . . . . . . 6-4

6.3.3.

Applying Commands to Several Plugs - Text Interface . 6-6

6.4.

Logging Out of Command Mode . . . . . . . . . . . . . . . . . . . 6-6

6.5.

The Automated Mode . . . . . . . . . . . . . . . . . . . . . . . . . 6-7

6.6.

Manual Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-8

Summary of Contents for IPS-15

























































Search results

Summary of Contents for IPS-15

Reviews:

Related manuals for IPS-15

Brands by name

Popular brands

WTI IPS-15, User Manual

Search results

Summary of Contents for IPS-15

Reviews:

Related manuals for IPS-15

Brands by name

Popular brands