6-6
IPS-800/IPS-1600 Series - User’s Guide
6.2.3.
Applying Commands to Several Plugs -
Text Interface
As described below, switching and reboot commands can be applied to only
one Switched AC Outlet, or to an assortment of outlets.
Note:
When switching and reboot operations are initiated, Boot/
Sequence Delay times will be applied as described in Section 5.3.3.2.
1.
Several Plugs:
To apply a command to several plugs, enter the numbers
or names for the plugs, separated by a "plus sign" (
+
). For example to
switch plugs 1, 3, and 4 Off, enter the following:
/OFF 1+3+4
[Enter]
2.
Series of Plugs:
To apply a command to a series of plugs, enter the
number for the plugs that mark the beginning and end of the series,
separated by a colon. For example, to switch plugs 1 through 3 On, enter
the following:
/ON 1:3
[Enter]
4.
All Plugs:
To apply a command to all plugs, enter an asterisk in place of
the name or number. For example, to Boot all plugs, enter the following:
/BO *
[Enter]
6.3. Logging Out of Command Mode
When you have finished communicating with the IPS, it is important to always
disconnect using either the "Log Out" button (Web Browser Interface) or /X
command (Text Interface), rather than simply closing your browser window or
communications program.
When you disconnect using the Log Out button or /X command, this ensures
that the IPS has completely exited from command mode, and is not waiting for
the inactivity timeout period to elapse before allowing additional connections.
Summary of Contents for IPS-1600
