9-6
The Status Screens
9.7. The Power Range Status Screen (VMR Only)
The Power Range Status Screen can be used to display power consumption readings
over a user-selected period of time, for the VMR unit as well as any optional remote VMR
units that may be connected.
Note:
The Power Range Status Screen is not available on NPS units.
To view the Power Range Status Screen, access the VMR command mode using an
account that permits access to Administrator or SuperUser level commands and then
proceed as follows:
Text Interface:
1. Type
/L
and press
[Enter]
to access the "Display Logs" menu. From the Display
Logs menu, type
4
and press
[Enter]
to display the Power Metering Log menu.
2.
Power Metering Log Menu:
The Power Metering Log Menu also allows you to
either display Power Metering Data or download Power History Data.
a)
Display Data Option:
The Display Data Option determines whether the
VMR will display total current consumption for each branch (Unit) or current
consumption for each outlet (Plug).
b)
Display Power Metering:
Type
2
and press
[Enter]
. The VMR will display
the Power Metering menu, which allows you to set a date range for the desired
data and display the data selected.
Web Browser Interface:
1. Place the cursor over the "Power Metering" link on the left hand side of the screen.
When the fly-out menu appears, click on the "Power Range" link to display the
"Select Plugs" menu.
2. Select the desired plugs, then click the "Select Plugs" button to display the "List
Power Range" menu.
3. Use the List Power Range menu to select the desired date range, and then click on
the "Get Chart" button.
In the Text Interface, Power Metering data will be displayed in table format. In the Web
Browser Interface, Power Metering data will be displayed in both table and graph format.
