2-4
Unit Description
2.3. RSM Series - Front Panel
As shown in Figure 2.5, the RSM front panel includes the following components:
CLEAR:
Can be used to restart the RSM operating system as described in
Section 2.11.
ON:
Lights when AC Power is applied.
SET:
Can be used to initialize the RSM to default parameters as described in
Section 2.11.
Ã
RDY:
(Ready) Flashes to indicate unit is operational.
ACTIVITY LEDs:
A series of LEDs, which will light when a CTS signal is detected,
and will flash during data transmission to indicate activity at the corresponding port.
• RSM-8 series units include 8 Activity LEDs
• RSM-16 series units include 16 Activity LEDs
CLEAR
SET
ON
RDY
ACTIVITY
1
2
3
4
5
6
7
8
www.wti.com
RSM-8
Remote
Site Manager
1 2 3 4
5
Figure 2.5: RSM Series - Front Panel (Model RSM-8 Shown)
