Operation
pH 3310
46
ba75802d06
05/2017
If the memory is full
The following window appears if all 500 storage locations are occupied:
You have the following options:
To erase the entire storage, confirm
Yes
.
To cancel the storage process and switch to the measured value
display, confirm
No
. Then you can e.g. store the data from the mem-
ory to a PC (see section 4.5.3) and subsequently erase the memory
(see section 4.5.4).
4.5.2
Automatic storage at intervals
The storage interval (
Interval
) determines the time interval between
automatic data storage processes. Each data storage process trans-
2
If necessary, change and confirm the ID number (1 ... 10000)
with
<
><
>
and
<ENTER>
.
The dataset is stored. The meter switches to the measured
value display.
15.03.2014 11:24:16
pH 7.000
24.8 °C AR +++
ID number:
1
Continue
Manual data storage
4
From
500
15.03.2014
08:00
Back
Data storage full. Erase?
Yes
No
Warning
15.03.2014
08:00
Back
