pH 3310
Operation
49
ba75802d06
05/2017
4.5.3
Editing the measurement data memory
The contents of the manual or automatic measurement data memory
can be shown on the display.
Each of the measurement data memories has a function to erase the
entire contents.
The contents of the manual or automatic measurement data memory
can be shown on the display and output to the interface.
Each of the measurement data memories has a function to erase the
entire contents.
Editing the data memory
The memory is edited in the menu,
Storage & config
/
Data storage
. To
open the
Storage & config
menu, press the
<F1
_
>
/[Menu] key in the
measured value display.
Open the manual or automatic storage directly with the
<RCL>
or
<RCL
_
>
key.
Note
The settings are explained here using the manual data memory as an
example. The same settings and functions are available for the auto-
matic data memory.
2
Using
<
><
>
, select
Yes
and confirm with
<ENTER>
.
The meter switches to the measured value display.
The automatic data storage function is terminated.
Stop automatic storage?
Yes
No
Warning
15.03.2014
08:00
Back
