Settings
pH/ION 7320
74
ba75935e04
12/2017
Alternative tempera-
ture
On
Off
Takes the temperature
value from the 2nd sensor.
Man. temperature
-25 ...
+25
... +130 °C
Entry of the manually deter-
mined temperature. For
measurements without tem-
perature sensor only.
ISE setup
/
AutoRead criterion
low
medium
high
Selection of the AutoRead
criteria (see section 8.1.1
M
ISE setup
/
Ion type
Ag, Br, Ca, Cd, Cl, CN,
Cu, F, I, K, Na, NO3,
Pb, S, NH3, NH4*,
CO2, ION
Selection of the ion type to
be measured.
An ion that is not included in
the list can be measured
with the setting, ION.
* Measuring with the NH 500 electrode:
The NH4 setting is not suitable for the gas-sensitive
electrode NH 500.
Select the following settings:
Ion type
"ION",
Valency
"-1".
ISE setup
/
Unit
mg/l
µmol/l
mg/kg
ppm
%
Selection, with which unit
the measurement result and
calibration standards should
be displayed.
ISE setup
/
Ion type
/ ION
Valency
Molar mass
Set the valence (
Valency
)
and molar weight (
Molar
mass
) for the ion.
ISE setup
/
Density
0.001 ... 9.999 g/ml or
kg/l
Adjustable density of the
test sample (only with
Unit
:
mg/kg, ppm, %)
Method
Standard addition
Standard subtraction
Sample addition
Sample subtraction
Blank value addition
Selection of the available
measuring methods.
Start method
Start measurement with the
selected method.
Menu item
Possible setting
Description
