pH/ION 7320
Transmitting data (USB interface)
ba75935e04
12/2017
84
11 Transmitting data (USB interface)
11.1 Options for data transmission
Via the USB interface you can transmit data to a PC. The following table shows
which data are transmitted to the interface in which way:
Data
Control
Operation / description
Current
datasets of the
sensors
indicated on
the display
Manual
With
<F2>
/
[USB output]
.
Simultaneously with every manual
data storage process (see section
10.1 M
Automatic, at
intervals
With
<F2__>
/
[USB output]
.
Then you can set the transmission
interval.
Simultaneously with every auto-
matic data storage process (see
section 10.2 A
Stored mea-
sured values
Manual
Displayed dataset with
<F2>
[USB
output]
after calling up from the
storage.
All datasets with the
Output to USB
function.
page 81).
Calibration
records
Manual
Calibration record with
<F2>
/
[USB
output]
Automatic
At the end of a calibration proce-
dure.
The following rule applies: With the exception of the menus, shortly
pressing the
<F2>
[USB output]
key generally outputs the display
contents to the interface (displayed measured values, measure-
ment datasets, calibration records).
