background image

User Manual

                                                                                                             

 

 

10

After the image above ends, the camera will do non-uniformity calibration automatically. 

 

Adjusting the viewfinders 

Adjust dioptre of the viewfinders till you see the image clearly and your eyes feel comfortably   

The ideal effect is that you see only one image in the two viewfinders 

 

Focusing 

The 140mm lens is motorized focusing, thus the camera incorporates a focus control motor for 

focusing 

y

  When there is no menu on the live image, press and –to focus       

y

  If there is menu displayed on the live image, press button M till exiting the menu and then 

press and –to focus 

 

Using the camera menu

   

When there is no menu on the live image, pressing button M on the camera body will bring up the 

menu as shown below or the battery status.     

 

 

 

 

The menu offers seven options: Option B, Option C, Option A, Option Z, Option P, Option GPS and 

Option Compass. The seven options can be classified into two types: function options to adjust 

Brightness 

Contrast 

Auto 

Zoom

Palette

GPS 

Digital 

compass 

Function options

 

Status options

 

Summary of Contents for GUIDIR IR529






















Reviews: