User Manual
20
Additional Information
y
All rechargeable batteries gradually lose their charge over time when they are left in storage. If
the battery is to be left in storage or for a period of non-use, a 'top-off' charge should be carried
out prior to use.
y
Always remove the battery from the equipment or charger when not in use. Store the battery in
a cool and dry place.
y
Periodically wipe the metal battery terminals with a soft, dry cloth.
y
Do not attempt to open or disassemble the battery.
y
Do not short circuit the battery by directly connecting the metal terminals.
y
Ensure that no metal objects touch the terminals.
Non Uniformity Calibration (NUC)
Non-uniformity calibration is used to clean up the live image of noise.
y
To perform a Non Uniformity Calibration (NUC), press button C on the camera body. This
process allows the automatic adjustment of the camera detector to ensure normalisation and
sharpness of the screen image
y
During the NUC the live image pauses temporarily, whilst a built-in shutter is placed in front of
the detector
y
This process takes only a couple of seconds, however for best results, please ensure that
camera is pointed at a low temperature uniform surface or the lens cap
Troubleshooting
Problems
Causes and Measures
Camera does not turn on:
Battery uninstalled. Insert the battery.
Battery improperly installed (i.e. battery is not locked in
place). Remove battery and install correctly.
Battery contacts are dirty. Clean battery contacts.
Battery charge is low. Recharge battery or replace with fully
charged item.
