User Manual
4
Introduction
This publication provides the necessary information required to safely operate the
GUIDIR
®
IR529
Handheld Thermal Binocular Viewer.
It is important to fully check all equipment with which you have been supplied
The equipment should be used, maintained and serviced by suitably trained personnel, capable of
carefully following the procedures and guidelines given in this User Manual
All User Manuals and leaflets should be read thoroughly before proceeding with operation of the
equipment
It is also advisable that all User Manuals and Instruction Leaflets supplied are kept readily available,
for reference when the equipment is in general use
Precautions
The following precautions must be adhered to at all times and must be considered in addition to
any advised precautions issued at the relevant worksite or work area
•
Do not use the
GUIDIR
®
IR529
Handheld Thermal Binocular Viewer in temperature
exceeding its working and storage temperature ranges
•
When
the
GUIDIR
®
IR529
Handheld Thermal Binocular Viewer is not in use or is to be
transported, ensure that the unit is stored in the protective carry case
•
The
GUIDIR
®
IR529
Handheld Thermal Binocular Viewer incorporates precision optical
equipment and static-sensitive electronics which should be protected from shock and
vibration at all times
•
Do not attempt to open the camera body, as this action will void the warranty
•
Do not connect or disconnect the cables without switching off the power supply
