8
/
2. Adjust the diopter (A) - start by closing
your left eye or covering the left objective
lens (G) with your hand. Look through your
right eye and adjust the diopter right (found
on the right eyepiece) until the object is in
focus.
Make note of this diopter setting in case
Rangefinding Operation
After the binocular is set up for you, press
power button (F) to power on the device.
Ranging Unit M/Y Switch
After the binocular is powered on, facing
the binocular down 90 degrees (looking
towards the ground), press the Power/RF
button to switch ranging unit of Meter (M)
and Yard (Y).
you need to set it
again. From this
point, you will only
need to use the
center focus wheel.
