WUNDER SA.BI.SRL EN USER MANUAL
RS 300 REV.01 10/01/2017 8
6. WEIGHING OPERATION
Before reading detailed instructions on how to use all the weighing functions that are built into your scale,
please read the following important guidelines:
- Always be sure that the display shows `Zero` before use, if it does not then please press the ZERO key.
- The Professional Medical Hoist scale is designed to detect when a stable weight is achieved, your reading
should be taken at this point.
ATTENTION!
Tilt angle over 3° will cause false reading.
During weighing phase by means of RS dynamometer, the operator must be sure that the
patient remains still, to avoid any instruments torsion and the following uncorrect
weighing.
We recommend to not use any lift or Hoist that hanger bar do not swivel 360 degrees.
After assembly at the lifter, the dynamometer must not be rotated horizontally. Rotation is
only allowed in connection with 360 degree swivel bearings installed in the lift system.
ATTENTION!
For measuring the patient ALWAYS SAFE
The operator MUST place a pillow
under the patient raised
WEIGHING THE PATIENT MUST BE STRICTLY OBSERVED
INSTRUCTIONS PARAGRAPH NUMBER 3
