Number of BGM CDs and repeat time
Vintage 850 Peacock / Classic 850 Peacock – Edition: 02.10.2007
26
8.1
Number of BGM CDs and repeat time
Press selection button 7, the display shows e.g.:
A = number of BGM CDs; disabled for Playstimulator
BGM OFF = 00.
B = Repeat time between the single BGM tracks (10 min.)
BGM-continuous play = 00
To programme
press selection button 7 -hold down- and
press selection button R. Release both buttons. The
display goes dark. Enter the number of CDs and the repeat
time with 4 digits.
8.2
Start position for BGM CDs and configuration
Press button 8. The start position of the BGM CDs is displayed in the left two digits. The RH digits
indicate whether BGM CDs can be selected over coin insertion or not.
A = start position of BGM CDs (01 = factory pre-setting)
B = 00 - BGM CDs can be selected
B = 01 - BGM CDs can NOT be selected
After entering this data the SCC unit calculates the BGM end
position itself. For loading of BGM discs the end position can be
calculated as follows:
end position = start po number of BGM CDs - 1
To reprogramme
press selection button 8 - hold - and press selection button R. The digital display
goes dark. Enter start position and the selection option with 4 digits!
Example:
A
B
5 CDs reserved for BGM,
repeat time 10 min.
A
B
To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | (800) 746-2255 | +1.561.391.7200
