How to select a track
Vintage 850 Peacock / Classic 850 Peacock – Edition: 02.10.2007
9
4
Track selection
4.1
How to select a track
If credit exists or free play is set you can select tracks by means of the buttons 0 - 9 on the
keyboard. First enter the number of the CD with two digits, then the track with two digits too.
Example: CD 2, track 9: Enter 0 - 2 - 0 - 9 (Exception: CD 100 = 00.)
4.2
The button R
You can delete wrongly entered numbers up to
the third digit by means of the button R (Reset).
But after having entered the fourth digit the
jukebox stores and executes a selection. By
pressing the button R the available credit will be
displayed for a few seconds.
4.3
The display flashes
After entering the fourth digit of a selection the jukebox starts to search
and play the selected CD immediately. If the display flashes the entered
selection was not valid.
Check:
z
if credit is available or
z
if the selection is higher then the programmed number of CDs in the carrier
If you select a higher track number than available on a CD the jukebox overcounts the tracks and
starts at the beginning.
Example: CD 03 contains 17 tracks. But selected track is 0 - 3 - 1 - 9. The jukebox plays track 02 of
CD 03.
A maximum of 25 tracks per CD can be selected!
button R
To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | (800) 746-2255 | +1.561.391.7200
