DOC-XP
Measurement and monitoring module
for 4 temperatures
DOC-XP_V1.2_PI_2019-04_EN
Subject to technical changes
Page 3 of 4
Circuit diagram
C-BUS interface
K1 = alarm relay
temperature sensor
monitoring
Open = active
Closed = inactive
Installing and connecting
WARNING
Danger to life from electric shock and/or fire!
Switch off the power to the entire plant when carrying out installation, wiring or removal
work. Otherwise a mains voltage and/or external voltage may still be present even if the
control voltage is switched off. Always remove both power plugs (L and N).
This device is designed for top-hat rail
installation. The housing has standard
dimensions and is also suitable for installation in
fuse boxes and distribution cabinets.
The devices can be positioned next to one
another without gaps.
53
106
9
0
58
