background image

DOM-XP

 

 
 

4-channel weekly timer and telecontrol unit 

 

DOM-XP_V2.10_PI_2019-04_EN 

Subject to technical modifications 

Page 1 of 4 

 

Front view 

 

 

Features 

  Telecontrol unit with the functions: On/Off, On/Off delay and wiping pulse (can be selected 

separately for each channel) 

  Weekly timer with 4 channels 

  Master controller for BSM001 

  Mirroring of 4 switching channels via BSM001 

  Automatic summer/winter time changeover 

  Delay times per channel 

  Restoring of the logic switching state after a power failure 

  Manual operation of the channels through digital inputs 

  Documentation of the 4 digital inputs 

  Simple parameter settings 

  Display of relay states 

  Parameter setting through plain text menu and direct operation 

  Plug-in screw terminals 

  Clear text designation of switching outputs and digital inputs in FRIGODATA XP 

  Foreign-language front plates available on request 

  Direct connection of a CAN-USB to the service socket 

  Connection to the Wurm system through a Wurm CAN communication bus (C-BUS) and 

FRIGODATA XP 

 

 

Summary of Contents for DOM-XP

Page 1: ...angeover Delay times per channel Restoring of the logic switching state after a power failure Manual operation of the channels through digital inputs Documentation of the 4 digital inputs Simple parameter settings Display of relay states Parameter setting through plain text menu and direct operation Plug in screw terminals Clear text designation of switching outputs and digital inputs in FRIGODATA...

Page 2: ...ntire plant when carrying out installation wiring or removal work Otherwise a mains voltage and or external voltage may still be present even if the control voltage is switched off Always remove both power plugs L and N Only qualified electricians are permitted to wire the device Use only the correct tools for all work Check all wiring after connection Take note of the maximum loads on all connect...

Page 3: ...fire Switch off the power to the entire plant when carrying out installation wiring or removal work Otherwise a mains voltage and or external voltage may still be present even if the control voltage is switched off Always remove both power plugs L and N This device is designed for top hat rail installation The housing is of a standard size and is also suitable for installation in fuse boxes and di...

Page 4: ...to 100m 0 75mm Up to 400m 1 5mm Technical data Power supply 230V 10 15 approx 5VA Digital inputs 4 x potential free contact for documentation only Internal power supply 12V Output relay 4 x switching output normally open contact rated voltage 230V 4 2 A Central unit Single chip microcomputer data memory and quartz clock with 5000h power reserve Monitoring system Self monitoring of data memory and ...

Reviews: