14
Intended Use
The wall and ceiling sander is intended:
• for commercial use in industry and trade,
• for indoor and outdoor sanding of walls and ceil-
ings,
• for sanding of drywalls with joint compound
applied,
• for operation with accessories provided by Würth
for this power tool and approved for a speed of at
least 1750 rpm.
The use of cutting discs, grinding discs, flap discs and
wire brushes is not permitted.
When using the wall and ceiling sander, a class M vac-
uum cleaner must be connected.
For damage caused by usage other than intended, the
user is responsible.
Product Features
1
Sanding head
2
Cardanic suspension
3
Main tube
4
Housing
5
Thumbwheel for speed adjustment
6
Lock-on button
7
Handle
8
Mains cable
9
On/Off switch
10
Connection hose
11
Bow-type handle
12
Extension tube
13
Adapter for vacuum hose
14
Vacuum hose
15
Blade bolt
16
Retaining disc
17
Velcro plate
18
Support plate
19
Brush collar
20
Replaceable corner protectors
Not all of the accessories illustrated or described
are included as standard delivery.
Tool Specifications
Assembling
Before any work on the machine itself,
pull the mains plug.
Replacing the Velcro or support
plate (see figure A)
Firmly hold the sanding plate
2
together with the sand-
ing head
1
, in order to prevent the sanding plate from
rotating.
Loosen screw
15
turning anticlockwise and remove it.
Dismount the sanding head
1
and exchange the parts
to be replaced.
Mount the sanding head
1
in the reverse order.
Mounting a Sanding Sheet
Remove the worn sanding disc from the Velcro plate
17
. (see figure B)
Position the sanding sheet centred on the Velcro plate
17
and press it firmly against the Velcro plate.
Carry out a test run to check if the sanding sheet is
seated centred.
Changing the Brush Collar
(see figure C)
Dismount the sanding head
1
(see Section “Replacing
the Velcro or support plate (see figure A)”).
Unscrew and remove the 7 screws, and remove the
brush collar
19
.
Insert a new brush collar
19
and fasten it with the 7
screws.
Wall and ceiling sander
WSS 225-E
Compact
Article number
0702 121 1
Rated voltage
230 V
Frequency
50 Hz
Rated power input
500 W
Rated speed
1100 –
1650 rpm
Grinding disc diameter, max.
225 mm
Length
1520 mm
Vacuum hose/
Length x diameter
4,000 x 32 mm
Weight
3.9 kg
Class of protection
I
OBJ_BUCH-0000000291-001.book Page 14 Friday, November 10, 2017 8:20 AM
