9
Technical data
Warranty
(proof by invoice or delivery note) for this device.
A damaged machine is either repaired or replaced
with a substitute machine. Damage resulting from
improper handling is excluded from the warranty.
Complaints can only be accepted if the device is
handed over assembled to a Würth branch, your
Würth sales representative or a Würth-authorised
customer service centre.
Disposal
Do not dispose of the device with domestic
waste!
Small electrical devices and packaging
must always be recycled in an environ-
mentally appropriate manner.
Electrical tools that are no longer usable
must be separately collected and for-
warded for environmentally appropriate recycling
according to the European Directive 2012/19/EU.
Maintenance/care
Visual inspection before starting work
The device is maintenance-free. The lamp and its
accessories must nevertheless be checked for external
damage before each use.
The device may not be used when damage
is visible.
It must be repaired or disposed of by a
commissioned and trained person.Please contact
your Würth branch.
Cleaning
Cleaning work may only be performed when the
been disconnected.
Clean the device by wiping it with a soft, clean
cloth. Remove stubborn dirt with a moistened cloth
and a common household cleaner. Using cleaning
agents that are abrasive or contain alcohol or solvent
will damage the housing.
4
0
4
9
7
2
8
0
.t
r
A
5X
Number of LEDs:
8
+1,
10
+
3
W
Li-Ion, 3.6V,4200mAH,
15.12Wh
Lamp input voltage/
current consumption:
5 V
1 A
Charging time:
approx. 5 hours
Operating time (Main light): 5 hours
Operating time (Boost light): 2.5 hours
Operating time (spot light):
8
hours
LED intensity (Main light):
500 lm
LED intensity (Boost light):
1000 lm
LED intensity (spot light):
300 lm
Service life of LED:
up to 10000 hours
Degree of protection:
IP 65
Storage temperature:
–20 °C to +50 °C
Operating temperature:
–10 °C to +40 °C
Operating voltage
power supply unit:
100-240 V~ / 50-60 Hz
Summary of Contents for 0827 940 45 Series
Page 2: ...2 ...
