15
or similar from getting into the telescopic tubes and
thus impairing the function of the ladder. The rubber
feet and end caps of the ladder are parts that even-
tually wear out and can be obtained from retailers.
Replace the caps when they start to wear. The pull
rings of the locking mechanism must not be replaced
by other types of pull rings. Only genuine spare parts
must be used for safety reason. If the pull rings need
to be replaced, contact the local retailer. Any repair
work must always be carried out by an authorised
service workshop. Don’t use the ladder if it needs to
be repaired. Contact the retailer.
NB! If the instruction decal on the ladder
begins to wear and is difficult to read,
you should order a new one. See the ad-
dress at the back of the instructions or
contact your local retailer.
Before use check that
• the stiles (uprights) are not bent, bowed, twisted,
dented, cracked or corroded
• the telescopic tubes around the fixing points for
other components are in good condition
• fixings (usually rivets, screws or bolts) are not miss-
ing, loose, or corroded
• rungs are not missing, loose, excessively worn, cor-
roded or damaged
• rubber feet and end caps are not missing, loose,
excessively worn, corroded or damaged
• the entire ladder is free from contaminants
(e.g. dirt, mud, paint, oil or grease)
• locking catches are not damaged or corroded and
function correctly.
CAUTION! If any of the above checks can-
not be fully satisfied you should NOT use
the ladder.
The manufacturer guarantees that the product is free
from material or manufacturing faults. If material or
manufacturing faults, or damage due to material or
manufacturing faults, can be proven, the buyer is
entitled to have the product repaired or replaced in
accordance with the local laws concerning sales of
consumer goods in the country of purchase.
Extended guarantee
The manufacturer is responsible for faults in the prod-
uct, for one year from the purchase date.
Scope of the guarantee
The manufacturer is not responsible for faults in the
product, if it is clear that the fault is due to it:
• not being used as described in these instructions
• not being cleaned, cared for, maintained, stored or
transported in accordance with these instructions
• being rebuilt, modified or subjected to other exter-
nal damage or accident
• unintentionally being damaged by any object or
substance
• being overloaded
• being repaired by an unauthorised service partner
or if non original spare parts have been used
• being incorrectly set up. The following are not con-
cidered as faults:
• normal wear and tear
• parts subjected to fair wear and tear.
Complaints
Proof of purchase must be presented for any guaran-
tee claims. If the purchaser wishes to make a claim
with regard to a fault, the dealer must be notified of
the fault within a reasonable time after the fault has
been discovered, or within the time period regulated
by the country of purchase.
Service and repair
Any service or repair work must always be carried
out by an authorised service workshop, which then
determines suitable action in each individual case.
In case of repairs, only original spare parts may be
used. Contact your dealer to find the location of your
nearest authorised service workshop, or consult the
contact information at the back of the instructions.
Guarantee conditions
