8
Control elements
(See Fig. I)
1
Carrying handle
2
Pin support
3
Quick-release lock
4
Lens
5
Clip
Matching of the lamp to the lighting
situation
You can adapt the WGL 1 to match your individual
lighting situation. The front cover panels are avail-
able for this purpose.
a) With front cover panel
• To illuminate a close-up area.
b) Without front cover panel
• For better illumination at a distance.
Operation
(see fig. II)
■
Bring the strain relief into the correct position
before installing the change bolt.
Direct lighting – light emission
DOWNWARDS
■
Push the change bolt DOWNWARDS into the
lamp.
■
Make sure that the latching bolt of the quick-re-
lease fastener
[3]
latches into the position
provided for it.
Indirect lighting – light emission
UPWARDS
■
Push the change bolt UPWARDS into the lamp.
■
Make sure that the latching bolt of the quick-re-
lease fastener
[3]
latches into the position
provided for it.
Installation for operation with a tripod /
mast system.
■
Connect the lamp with the pin support to the
tripod/mast.
■
Lock the lamp using the star knob.
Technical data
Non-stationary workplace lamp
Item 0981 180 841
Lamp luminous flux
40,000 lm
Luminous flux of illuminant
45,000 lm
Operating voltage
100 - 240 V, 50/60 Hz
Capacity rating
280 W
Degree of protection
IP65
Protection class
I
Impact resistance
IK10
Housing
Impact and break-proof
Cable
Oilflex
®
540 P yellow
Cable length
10 m (5 m 3G1.5 mm
2
, 3 m 7G0.75 mm
2
)
Earthed power outlet or shaped solid rubber plug
16 A/250 V∼
Operating temperature
- 40°C to + 59°C
Dimensions (H x W x D)
228 x 446 x 446 mm
Weight approx.
10,000 g
Φ
EEK
LED
EEK
CRI
CCT
40,000 lm
A++
A++
70
5000K
Note
The clearance on all sides must be at least 500 mm.
