19
Secure the workpiece.
A workpiece clamped with
clamping devices or in a vice is held more secure than by
hand.
Always wait until the machine has come to a
complete stop before placing it down.
The tool
insert can jam and lead to loss of control over the power
tool.
Do not open the battery.
Danger of short-circuiting.
Protect the battery against heat, e.g.,
against continuous intense sunlight, fire,
water, and moisture.
Danger of explosion.
In case of damage and improper use of the
battery, vapours may be emitted. Ventilate
the area and seek medical help in case of com-
plaints.
The vapours can irritate the respiratory system.
Use the battery only in conjunction with your
Würth power tool.
This measure alone protects the
battery against dangerous overload.
The battery can be damaged by pointed
objects such as nails or screwdrivers or by
force applied externally.
An internal short circuit
can occur and the battery can burn, smoke, explode or
overheat.
Product Description and Specifications
Read all safety warnings and all
instructions.
Failure to follow the warnings
and instructions may result in electric shock, fire
and/or serious injury.
While reading the operating instructions, unfold the graphics
page for the machine and leave it open.
Intended Use
The machine is intended for lengthways and crossways cut-
ting of wood with straight cutting lines as well as mitre cuts in
wood while resting firmly on the workpiece.
The light of this power tool is intended to illuminate the power
tool’s direct area of working operation and is not suitable for
household room illumination.
For damage caused by usage other than intended, the user is
responsible.
Product Features
The numbering of the product features refers to the illustration
of the power tool on the graphics page.
1
Battery pack
2
Battery unlocking button
3
Lock-off button for On/Off switch
4
On/Off switch
5
Hex key
6
Spindle lock button
7
Base plate
8
Fastening bolt for parallel guide
9
Scale for mitre angle
10
Wing bolt for bevel-angle preselection
11
Cutting mark, 45°
12
Cutting mark, 0°
13
Blade guard
14
Handle (insulated gripping surface)
15
Battery charge-control indicator
16
Temperature control/overload protection indicator
17
Wing bolt for cutting depth preselection
18
Cutting-depth scale
19
Lever for retracting blade guard
20
Saw spindle
21
Retracting blade guard
22
Mounting flange
23
Saw blade
24
Clamping flange
25
Clamping bolt
26
Light
27
Reference mark for mitre angle setting
28
Fastening screw for extraction adapter
29
Extraction adapter*
30
Vacuum hose*
31
Reference mark for cutting depth setting*
32
Parallel guide/guide rail adapter*
33
Set of screw clamps*
34
Guide rail*
*Some accessories shown or described are not part of
the standard delivery scope of the product.
OBJ_BUCH-2300-001.book Page 19 Wednesday, October 22, 2014 12:41 PM
