15
90° accuracy of the vertical line
(fig. V)
■
Place the device in the corner of a room with
side lengths of 3.2m and 4.2m.
■
Switch on all vertical lines.
■
Measure exactly 4 m from the plumb point of
the device alongside the vertical laser line and
mark point
A
on the floor.
■
Measure exactly 3 m from the plumb point of
the device alongside the second vertical laser
line and mark point
B
on the floor.
■
Measure distance
C
between
A
and
B
, it should
be exactly 5 m.
Expected accuracy ±0.8 mm.
Application examples
Levelling, transferring benchmarks/
datums
Level the laser to the required height.
Mark the points on the laser line or project the
height difference between laser beam and the
required height using a metre rule.
Maintenance / care
Do not use aggressive cleaning agents or solvents.
Clean the laser windows with a soft cloth.
In the unlikely event of a failure or defect, have the
appliance examined and repaired by an authorised
customer service workshop for Würth power tools.
With any enquiries or spare parts orders, always
quote the 10 digit item number as given on the
device type plate.
Environmental instructions
Do not dispose of this device with
household waste. Please take the
batteries or the battery pack out of
the device before you dispose of it.
Dispose of the device via an
approved waste disposal company
or via your local authority waste
disposal facility. Observe the currently valid regula
-
tions. In case of doubt, contact your waste disposal
facility. Dispose of all packaging material in an
environmentally compatible manner.
Battery packs/batteries:
Do not dispose of batteries in household waste,
do not expose to fire or water. Collect and recy
-
cle batteries or dispose of with due care for the
environment.
Warranty
We provide a warranty for this Würth device from
the date of purchase and in accordance with the
legal/country-specific regulations (proof of purchase
through invoice or delivery note). Damage that has
occurred will be corrected either by replacement or
by repair. Damage caused by improper handling is
not covered by the warranty. Claims under warranty
can only be accepted if the device is returned fully
assembled to a Würth agency, your Würth sales
representative or an authorised Würth customer ser
-
vice workshop. Subject to technical changes without
prior notice.
We accept no liability for printing errors.
Spare parts
If in spite of careful manufacturing and test proce
-
dures, the device becomes faulty, a repair by Würth
masterService should be arranged.
With any enquiries or spare parts orders, always
quote the item number as given on the device type
plate. The latest spare parts list for the device is
available online at http://www.wuerth.com/parts
-
manager. Alternatively, contact your local Würth
agency for a hardcopy.
Summary of Contents for MLLG18
