complement notation.
The accuracy is ±2dB when inside the RSSI range of -90 to -20 dBm.
The value of the parameter TX power is read from the content of the received advertise
packet.
Format:
Start signal
Command
Length
BTMAC
RSSI
TX Power
CS
0x02
0x8B
2 Bytes
6 Byte
1 Byte
1 Byte
1 Byte
7.1.5. CMD_BEACON_RSP
This telegram indicates the reception of an advertising packet. This data can only be re-
ceived, when the module is in
ACTION_SCANNING
mode and the corresponding value in the
is set. If active scanning is enabled by setting the
, received
scan response packets are output in addition.
Besides the
, the RSSI value of the advertising packet and the raw data is output.
The accuracy is ±2dB when inside the RSSI range of -90 to -20 dBm.
The format of the raw advertising data is described in the Bluetooth
®
specifi-
cation version 5.1 | Vol 3, Part C, section "Advertising and scan response data
format".
Format:
Start signal
Command
Length
BTMAC
RSSI
Raw advertising data
CS
0x02
0xCC
2 Bytes
6 Byte
1 Byte
(Length - 7) Bytes
1 Byte
Proteus-III reference manual version 1.3
© August 2020
www.we-online.com/wireless-connectivity
67