Start signal
Command
Length
Status
BTMAC
CS
0x02
0x88
0x07 0x00
1 Byte
6 Bytes
1 Byte
Status:
0x00:
Encrypted link to previously bonded device established
0x01:
Bonding successful, encrypted link established
0x02:
No bonding, pairing successful, encrypted link established
7.2.4. CMD_CHANNELOPEN_RSP
This command is sent to the host as soon as connection setup and service discovery has
been completed successfully. Now data can be transmitted using the
. Next to
the
of the connected device, the maximum payload size that is supported by the
link is part of this telegram. This indication message is the result of a connection request
(
Format:
Start signal
Command
Length
Status
BTMAC
Max payload
CS
0x02
0xC6
0x08 0x00
1 Byte
6 Bytes
1 Byte
1 Byte
Status:
0x00:
Success
7.2.5. CMD_DISCONNECT_REQ
This command shuts down the existing connection. Thereafter the module prints a
to confirm that the request has been received, the indication mes-
sage
follows which determines whether the disconnection operation
has been performed successfully or not.
Format:
Start signal
Command
Length
CS
0x02
0x07
0x00 0x00
0x05
Response (
Start signal
Command | 0x40
Length
Status
CS
0x02
0x47
0x01 0x00
1 Byte
1 Byte
Status:
0x00:
Request received, try to disconnect
0x01:
Operation failed
0xFF:
Operation not permitted
Proteus-III reference manual version 1.3
© August 2020
www.we-online.com/wireless-connectivity
69