10
Working Advice
Position the fixed rollers
8
of the guard against the sur-
face to be cut and start the power tool.
When cutting, apply slight pressure against the dia-
mond cutting disc.
Always move the power tool in the arrow direction on
the movable guard.
When cutting vertical slots, work from top to bottom. In
this manner, you can take advantage of the wall-slot
cutter's weight and exert less force.
When cutting horizontal slots, work from right to left,
applying only enough pressure to move the power tool
along. Excessive pressure can overload the motor,
especially when cutting hard and compact surfaces,
which is indicated through a significant reduction of the
speed and overheating.
Dust Extraction
The machine can be connected directly to the socket
outlet of a WÜRTH industrial vacuum cleaner with
remote control operation. The vacuum cleaner is auto-
matically starting when switching on the machine.
For dust extraction, connect the vacuum-hose connec-
tion with the cut-to-size adapter and insert it into the
dust-extraction sleeve. For this, use the special adapter
(702 400 042, accessory).
When cutting, always use dust
extraction, as otherwise, the motor
will quickly clog up with masonry
dust and become damaged.
Observe the relevant regulations in your country for the
materials being worked on.
Maintenance and Cleaning
Before any work on the machine itself,
pull the mains plug.
For safe and proper working, always
keep the machine and ventilation slots
clean.
If the machine should fail despite the care taken in man-
ufacturing and testing procedures, repair should be
carried out by a Würth master-Service.
In all correspondence and spare parts orders, please
always include the article number given on the type
plate of the machine.
The current spare parts list for this power tool can be
viewed in the Internet under
“http://www.wuerth.com/partsmanager”
or be requested from your next Würth branch office.
Guarantee
For this Würth power tool, we provide a guarantee in
accordance with the legal/country-specific regulations
from the date of purchase (verified by invoice or deliv-
ery document). Damage that has occurred will be cor-
rected by replacement or repair.
Damage caused by normal wear, overloading or
improper handling is excluded from the guarantee.
Claims can only be accepted if the power tool is sent
undisassembled to a Würth branch office, your Würth
sales representative or a customer service agent for
Würth compressed-air and power tools.
Disposal
The machine, accessories and packaging should be
sorted for environmental-friendly recycling.
Do not dispose of power tools into household waste!
Only for EC countries:
According to the European Guideline
2002/96/EC for Waste Electrical and
Electronic Equipment and its implemen-
tation into national right, power tools
that are no longer usable must be col-
lected separately and disposed of in an environmen-
tally correct manner.
Noise/Vibration Information
Measured sound values determined according to
EN 60745.
Typically the A-weighted noise levels of the product
are: Sound pressure level 97.5 dB(A); Sound power
level 135 dB(A). Uncertainty K=3 dB.
Wear hearing protection!
Overall vibrational values (vector sum of three direc-
tions) determined according to EN 60745: Vibrational
emission value a
h
<2.5 m/s
2
, uncertainty K=0.5 m/s
2
.
The vibration emission level given in this information
sheet has been measured in accordance with a stand-
ardised test given in EN 60745 and may be used to
compare one tool with another. It may be used for a
preliminary assessment of exposure.
OBJ_BUCH-0000000093-001.book Page 10 Thursday, November 15, 2012 8:08 AM
