5. Port definition
5.1 Air system port
5.1.1 Back side
[1]: For frequency switch setting
Press the button more than 5 seconds, 4 lights (HDMI, LINK, OSD, WORK) are all turn
release the key, 4 lights flash as 0.5Hz frequency, and then 4 lights back to normal state, that
means channel change is finished.
switch process, please switch again. The
5180
5220
5260
5580
560
5620
[2]: For bind the air system and ground system.
Press the button more than 5 seconds, 4 lights (HDMI, LINK, OSD, WORK) are all turn
4 lights flash one by one, when the LED light works well that means they are well bind.
takes 2 minutes.If the connection has not been resumed after 2 minutes,
ends,and donnot need rebind.
5.1.2 Right side port
8
5. Port definition
5.1.1.1
Press the button more than 5 seconds, 4 lights (HDMI, LINK, OSD, WORK) are all turn
release the key, 4 lights flash as 0.5Hz frequency, and then 4 lights back to normal state, that
means channel change is finished. If devices not connected yet after 10 seconds of frequency
switch process, please switch again. The frequency supported by device as below
5260
5320
5520
5540
5560
5620
5640
5660
5680
5700
: For bind the air system and ground system.
seconds, 4 lights (HDMI, LINK, OSD, WORK) are all turn
4 lights flash one by one, when the LED light works well that means they are well bind.
If the connection has not been resumed after 2 minutes, repower
5.1.2.1
Press the button more than 5 seconds, 4 lights (HDMI, LINK, OSD, WORK) are all turn-off,
release the key, 4 lights flash as 0.5Hz frequency, and then 4 lights back to normal state, that
onds of frequency
by device as below
:
seconds, 4 lights (HDMI, LINK, OSD, WORK) are all turn-off, then
4 lights flash one by one, when the LED light works well that means they are well bind.This may
repower on both
Summary of Contents for DVL-1
Page 5: ...2 1 1 3 1 ...