5.2.2 Left side port
[1]:For bind the air part and ground part.
Press the button more than 5 seconds, 4 lights (HDMI, LINK, OSD, WORK) are all turn
stop press the button, 4 lights flash one by one, when the LED light works well that means they
are well binded.This may takes 2 minutes.
minutes, repower on both ends, and do not need to rebind
[2]: Monitor the ground system work status.
Light status
Description
Flash
regularly
Ground system works well
Other status Ground system does not work well
[3]: Monitor air system and ground system connect status.
Light status
Description
Turn-on
Connect with air system
Turn-off
Des not connect with air system
[4]: monitor the display device status.
Light status
Description
Turn-on
Display device connect well
Turn-off
Display device does not connect
[5]: Monitor mobile connect status.
11
5.2.2.1
:For bind the air part and ground part.
seconds, 4 lights (HDMI, LINK, OSD, WORK) are all turn
stop press the button, 4 lights flash one by one, when the LED light works well that means they
his may takes 2 minutes.If the connection has not been resumed after 2
, and do not need to rebind.
: Monitor the ground system work status.
Action
Ground system works well
NA
Ground system does not work well
Connect the power again or
contact with the customer
service
: Monitor air system and ground system connect status.
Action
Connect with air system
NA
Des not connect with air system
1. Please wait for connecting
2. Make sure the air system is
connecting the power.
3. Bind the air system and
ground system again.
4. Connect the power again
: monitor the display device status.
Action
Display device connect well
NA
Display device does not connect
Check Display device cable
position
seconds, 4 lights (HDMI, LINK, OSD, WORK) are all turn-off, then
stop press the button, 4 lights flash one by one, when the LED light works well that means they
If the connection has not been resumed after 2
Connect the power again or
with the customer
1. Please wait for connecting
2. Make sure the air system is
3. Bind the air system and
4. Connect the power again
Check Display device cable
Summary of Contents for DVL-1
Page 5: ...2 1 1 3 1 ...