2
Hold the Z-axis vertically by hand and
plug in the Z motor cable.
Assemle the Z axis on the base by
use the 3 large screws included.
Push the Y-motor cable(Red) into the
white cable holder.
Connect the Y-Z endstop cable to the
connector inside the cable holder.
Z-Y Endstop
cable
Y-motor
cable
Z-motor cable
Extruder cable
Y and Z-axes assembly
>> INSTALLATION GUIDE
X-axis and machine base
STEP 3.
STEP 4.
STEP 2.
STEP 1.