20
Breakaways
The Spray Wyng II is protected by an auto-reset shock that
will reset the wing tip once the obstruction is cleared.
If the breakaway wing tip becomes slack, tighten the coil
spring.
The Spray Wyng II is also equipped with a shear bolt
that protects the inner and outer wings if an obstruction
is hit inside the breakaway. The shear bolt (P/N W8325-
SHEAR1HD-KIT -- 100’, 108’ -- Red; W8325-SHEAR1-KIT
-- 60’, 80’, 90’ -- Blue) is a machined bolt and should be
ordered from Wylie Customer Service. Do not replace the
shear bolt with a standard bolt.
Folded Outer Wing Spraying
The Spray Wyng II 80’ or 90’ can be reduced to a 49’
spraying width (100’ boom -- 54’) by folding the outer
wings and turning off two sections of the five section boom
plumbing.
Activate the combined outer fold switch on the control panel
to fold/unfold the outer wings.
Be aware that when the sprayer is operated with the
breakaways folded, the boom is only protected by
the shear bolts. Extra care should be taken to avoid
obstructions.
Figure C25
Wing Tip Breakaway
Sprayer Operation
Figure C26
Auto-Reset Shock
Figure C24
Unfolding Outer Wings
Figure C23
Folded Outer Wings
Figure C22
Single Side Spraying
< Coil Spring
Summary of Contents for Spray Wyng II
Page 4: ... ...
