Copyright © 2021 WyreStorm Technologies |
WyreStorm.com
Apollo User Manual | 210622
9 of 10
Technical Support: 844.280.WYRE (9973)
Support@WyreStorm.com
Application Modes
This section allows you to fix Apollo’s behavior based on the type of application it is used in.
BYOD scenario
(as described above) is for traditional non-Zoom Room meeting spaces. In this mode the USB host is
designed to connect to a BYOD computer that is hosting the meeting software.
In the Zoom Room scenario, the USB 2.0 host connection is fixed and is the only active host that allows
access to Apollo’s speakerphone and any peri
pheral USB devices. This mode is designed to support a
dedicated ‘room PC’ that is the only device that can access the speakerphone and camera.
Note: In
‘
Zoom Room
’
scenario mode DisplayLink is not supported, only USB-C or HDMI connections can be
used.
Guide Screen
The Guide Screen section allows a custom image to be uploaded to Apollo and shown on a display when
the system is in a dormant state. By default, a WyreStorm provided Guide Screen is loaded on Apollo which
provides instructions on how to wirelessly cast. This can be replaced with any image based on application
requirements.